PRECAUTIONS FOR USING SHARPENING MACHINE

2022-07-24 14:45

新淘彩 www.zaizaihp.com WUXI KAIFENG MACHINERY MANUFACTURING CO., LTD

摆头磨尖机.jpg


PRECAUTIONS FOR USING SHARPENING MACHINE   


1. The rotation direction of the grinding wheel should be that the operator stands on the side of the switch, and the clockwise rotation of the grinding wheel is positive rotation. Precautions for using the sharpening machine: if it is reversed for a long time, the lock nut of the grinding wheel is easy to be reversed, resulting in the crushing of the grinding wheel and personal injury.

2. When the grinding wheel is used for a period of time, the protruding parts on both sides of the grinding wheel should be trimmed, and the operator should use the special trimming tool of the manufacturer. It is strictly forbidden to use incorrect methods to trim the grinding wheel.

3. In the process of use, the spinning wheel should be adjusted to two centimeters away from the sharpening point to avoid scalding the polyurethane wheel after long-term use.

4. Change the wire diameter of the sharpening machine, and the gap between the threading wheel and the bottom support plate should be adjusted to two-thirds of the wire diameter to avoid the excessive pressure of the threading wheel and the deformation of the support plate.

5. The material receiving device shall be placed at the discharge port to make the steel wire processed by the sharpening machine fall neatly, so as to prevent the steel wire from falling into the grinding wheel and injuring people by bouncing.


1. The rotation direction of the grinding wheel should be that the operator stands on the side of the switch, and the clockwise rotation of the grinding wheel is positive rotation. Precautions for using the sharpening machine: if it is reversed for a long time, the lock nut of the grinding wheel is easy to be reversed, resulting in the crushing of the grinding wheel and personal injury.

2. When the grinding wheel is used for a period of time, the protruding parts on both sides of the grinding wheel should be trimmed, and the operator should use the special trimming tool of the manufacturer. It is strictly forbidden to use incorrect methods to trim the grinding wheel.

3. In the process of use, the spinning wheel should be adjusted to two centimeters away from the sharpening point to avoid scalding the polyurethane wheel after long-term use.

4. Change the wire diameter of the sharpening machine, and the gap between the threading wheel and the bottom support plate should be adjusted to two-thirds of the wire diameter to avoid the excessive pressure of the threading wheel and the deformation of the support plate.

5. The material receiving device shall be placed at the discharge port to make the steel wire processed by the sharpening machine fall neatly, so as to prevent the steel wire from falling into the grinding wheel and injuring people by bouncing.


Tel:
0510-83071180 83071186
Mrs. Liu:
13057240011
Add:
7-5 Zhangshe Road, Hudai Town, Binhu District, Wuxi City
  • Name*

    *
  • Email

  • Phone

  • Message